Guide to Wetsuit Repair

By Dexter O'Neal


Wetsuit repair is a good method to extend your wetsuits lifespan. In case your wetsuit is just plain old, if it got stiff, pale and hard from all of the sun and UV rays and also the neoprene is starting to crack there is not much you could to. This form of damage is just not repairable. But should you have ripped your wetsuit on some rocks or wherever, then this might be fixed with no problems and your wetsuit will be as good as new.

Wetsuit repairs are pretty low-cost and they do a great job sealing the hole in your wetsuit. Nonetheless when the hole is small and you do not desire to lose time and/or funds taking it to repair shop you may also repair it yourself.

What kind of wetsuit hole or tear are you able to repair at home?

The simplest hole to repair is often a hole that's so tiny that you do not need any additional neoprene to cover it up (you can just glue the neoprene back together) and is not much more than an inch (or maybe two) long. Anything bigger I advise that you just take it to wetsuit repair shop. Also - if the stitches are ripped and the seams are opening up I also suggest you take it to the repair shop.

Ways to repair your wetsuit?

Things which you will most likely need to fix your wetsuit:

Alcohol (for cleaning), Short-bristle brush (1/2" bristles), Neoprene cement (you could locate it at most surf shops), Something heavy to weight the repaired area

If you get a unique wetsuit repair kit most of these things really should be inside. Or you can get a tube of liquid neoprene which is utilized for wetsuit repairs (among other things) and get the rest of the stuff yourself.

Then clean the wetsuit as well as the hole of any dirt, wax, salts and so on, Make certain it is dry. Wash it with alcohol and wait till it evaporates. Make use of the brush to place neoprene cement on all wetsuit surfaces that should be sealed back together and wait 5 minutes, be certain you keep them apart. Repeat the procedure and leave for ten minutes. Securely press the surfaces together and apply even pressure, use a book, a rock or something... Wait a handful of hours (~6 hours). PS: Be cautious not to glue the entire wetsuit together! And wetsuit repair is done.




About the Author:



No comments:

Post a Comment